Dell PowerVault LTO3-060 Bedienungsanleitung PDF herunterladen (Seite 11)

Interpreting Operation Mode Status LEDs



The front panel LEDs ((2), (3), (4), and (5) in Figure 2) indicate the current status of the drive.

The following table gives information on interpreting the status LEDs while the drive is in Operation mode and there are no errors. If there are errors, go to the

Troubleshooting section, Table 3. Interpretation of status LEDs in Operation mode (Error Conditions).

Table 2. Interpretation of status LEDs in Operation mode (No Errors).

Please read all restrictions and disclaimers.

Back to Contents Page

Cartridge Emergency Eject and Reset

the drive

Press and hold the Unload button on the drive for 12 seconds. The drive saves a dump of the current drive state to RAM,

then reboots. After the reboot, the cartridge is slowly rewound to the beginning of tape (this may take some time). Another

press of the unload button will eject the cartridge.

Attention: Do not cycle power as this will erase the contents of the dump.

LED

icon

Power-

LED

Test

Power-

on Self

Test

(POST)

progress

cartridge

is not

loaded

cartridge

is not

loaded;

drive

needs

cleaning

Cartridge

loaded,

activity

Cartridge

loaded,

activity;

drive

needs

cleaning

Data

cartridge

loaded,

activity

Data

cartridge

loaded,

activity;

drive

needs

cleaning

Cleaning

cartridge

loaded,

activity

Cartridge

is loading

unloading

Cartridge

is loading

unloading;

drive

needs

cleaning

Firmware

download

progress

Firmware

download

progress;

drive

needs

cleaning

Firmware

update in

progress

Firmware

update in

progress;

drive

needs

cleaning

(for 2.0

sec.)

(for 2.0

sec.)

(for 2.0

sec.)

(for 2.0

sec.)

LEDs are turned on during Boot process for 2 seconds.

A solid amber "Clean" LED indicates that the drive needs cleaning. In most cases the drive will continue to function, but it should be cleaned as soon as possible.

"Firmware download" refers to the transfer of firmware from the host to the drive.

"Firmware update" refers to the drive incorporating the new firmware.

Key:

= OFF

= ON

= Flashing slowly