Dell PowerEdge RAID Controller S110 Bedienungsanleitung Seite 42

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 76
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 41
40 Troubleshooting
3
Scroll to
Boot Sequence
. Press <Enter> and make sure that
Hard drive
C: (* PERC S110)
is the first device listed.
* The variable text displayed here might be:
Embedded SATA 1
,
Slot 1
, or
Integrated SAS
.
4
Scroll to
Boot Sequence Retry
. Make sure that the setting is
Enabled
.
5
Press <Esc> to exit and continue booting.
NOTE: If changes are made at the
Dell Inc. PowerEdge BIOS
screen, a
dialog box appears and asks you to save your changes and then exit.
Bootable Virtual Disk is in a Failed State
1
Press
<Ctrl><Alt><Del>
to restart.
2
After the system restarts, press <Ctrl><R>. Check the status of the
bootable virtual disk at the
Virtual Disk
field, or by highlighting
View
Virtual Disks Details
and pressing <Enter>.
3
Check for missing or offline physical disks.
The Boot Order is Incorrect for a Bootable Virtual Disk
1
When prompted at system startup, press <Ctrl><R>
to access the
PERC BIOS Configuration Utility
.
2
Check
Virtual Disks
and make sure that the bootable virtual disk is the
first virtual disk listed.
3
As required, use the
Swap Two Virtual Disks
option to reposition the
virtual disks.
The Boot Order for Non-RAID Virtual Disk when Rebooted
A Non-RAID virtual disk is no longer in the first position in the PERC BIOS
Configuration Utility list after the system is rebooted.
NOTE: When booting from a Non-RAID virtual disk, creating a virtual disk in Dell
OpenManage Server Administrator Storage Management changes the virtual disk
order and displaces the bootable Non-RAID virtual disk from the first position. PERC
S110 then attempts to boot from the first virtual disk.
NOTE: A Non-RAID virtual disk can be created from Non-RAID physical disks
(which are physical disks initialized at a non-PERC S110).
1
When prompted at system startup, press <Ctrl><R>
to access the
PERC BIOS Configuration
Utility.
A5_bk0.book Page 40 Thursday, May 29, 2014 11:37 AM
Seitenansicht 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare