Dell PowerEdge RAID Controller H200 Bedienungsanleitung PDF herunterladen (Seite 65)

Troubleshooting 65

BIOS Error Messages

Table 7-4. BIOS Error Messages

Message Meaning

Press <Ctrl+C> to

Enable BIOS

When the BIOS is disabled, you are given the option

to enable it by entering the Configuration Utility.

You can change the setting to Enabled in the

configuration utility.

Adapter configuration

may have changed,

reconfiguration is

recommended!

Press CTRL-C to run

Dell PERC H200/6Gbps

SAS HBA Configuration

Utility…

Start the Configuration Utility and confirm the

configuration of the PERC H200 or 6Gbps SAS HBA

controller.

Initializing... Displays while the BIOS is waiting to initialize.

SAS discovery error Indicates that there was a discovery error reported by

the firmware and may be accompanied by more such

messages. Enter the Configuration Utility to

investigate.

Integrated RAID

exception detected:

The BIOS detected an exception with one or more

RAID virtual disk. For additional troubleshooting

information, see the error message "Volume

(xx:yy:zzz) is currently in state

“STATE”.

PERC H200.book Page 65 Tuesday, July 13, 2010 4:15 PM

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 91 92

Keine Kommentare

Dell PowerEdge RAID Controller H200 Bedienungsanleitung Seite 65