Dell PowerEdge Rack Enclosure 4210 Bedienungsanleitung PDF herunterladen (Seite 10)

8 Dell™ PowerEdge™ 4210 Installation Guide

Installation Tasks

Installing a rack cabinet involves performing the following tasks:

Removing and replacing the rack doors

Removing and replacing the side panels

Reversing the front door and badge (optional)

Securing the leveling feet

Installing the stabilizer feet

Routing cables through the rack

Coupling two racks (optional)

Removing high-density rear door panels

Recommended Tools and Supplies

You may need the following tools and supplies to install the rack:

• #2 Phillips screwdriver

• Flat head screwdriver

• 12-mm wrench

• Needle-nose pliers

• 4-mm Allen wrench (if you want to reverse the direction that the front

door opens)

• 5-mm Allen wrench (included in kit)

• Keys to the rack doors and side panels

Removing and Replacing the Rack Doors

CAUTION: Because of the size and weight of the rack cabinet doors, never

attempt to remove or install them by yourself.

CAUTION: Store the doors where they will not injure someone if the doors

accidently fall over.

Removing the Front Door

Press the door-latch button to release the door handle, then open the front

door all the way (see Figure 1-1).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 161 162

Keine Kommentare

Dell PowerEdge Rack Enclosure 4210 Bedienungsanleitung Seite 10