Dell PowerEdge FX2/FX2s Bedienungsanleitung PDF herunterladen (Seite 160)

100

101

Status Definition

Length: 93 (+/- 1)

meters, Status:

Open

An opening is detected on the cable. The location, in this

Example is 93 meters. The open is accurate to plus or minus

one meter.

Status:

Impedance

Mismatch

There is an impedance mismatch in the cables.

Example

Dell#show tdr tengigabitethernet 0/1

Time since last test: 00:00:02

Pair A, Length: OK Status: Terminated

Pair B, Length: 92 (+/- 1) meters, Status: Short

Pair C, Length: 93 (+/- 1) meters, Status: Open

Pair D, Length: 0 (+/- 1) meters, Status: Impedance Mismatch

Commands

tdr-cable-test — Runs the TDR test.

show vlan

Displays the current VLAN configurations on the switch.

Syntax

show vlan [brief |id vlan-id | name vlan-name]

Parameters

brief (OPTIONAL) Enter the keyword brief to display the

following information:

• VLAN ID

• VLAN name (left blank if none is configured.)

• Spanning Tree Group ID

• MAC address aging time

• IP address

id vlan-id (OPTIONAL) Enter the keyword id followed by a number

from 1 to 4094. Only information on the VLAN specified is

displayed

name vlan-

name

(OPTIONAL) Enter the keyword name followed by the name

configured for the VLAN. Only information on the VLAN

named is displayed.

Command

Modes

• EXEC

• EXEC Privilege

Command

History

Version 9.4(0.0) Supported on the FN I/O aggregator.

160

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 461 462

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell PowerEdge FX2/FX2s Bedienungsanleitung Seite 160

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Dell PowerEdge FX2/FX2s