Dell PowerEdge FX2/FX2s Bedienungsanleitung PDF herunterladen (Seite 3)

| 3

How To Use This Document

This document contains information on open and resolved caveats and operational information specific to the Dell Networking

OS on the Dell PowerEdge FN I/O Aggregator.

Caveats are unexpected or incorrect

behavior, and are listed in order of Problem Report (PR) number within the appropriate

sections.

Note: Customers can subscribe to caveat update reports or use the BugTrack search tool to read current

information about open and closed software caveats. To subscribe or use BugTrack, visit

Dell Networking

Support at: https://www.force10networks.com/CSPortal20/BugTrack/SearchIssues.aspx. BugTrack

currently tracks software caveats opened in Dell Networking OS version 6.2.1.1 and later.

All Release Notes are available on the Software Center tab of Dell Networking Support. The link to the

relevant Release Notes for each software version is next to the link for that version:

https://www.force10networks.com/CSPortal20/Software/Downloads.aspx

Prerequisites

• The Dell Chassis Management Controller (CMC) version 1.05 or later is required in a Dell PowerEdge FX2 Server

Enclosure to use an FN I/O Aggregator module running Dell Networking OS version 9.4(0.0) or later.

You can use the CMC out-of-band management interface to access and

manage an Aggregator using the Dell Networking

OS command-line interface. For more information, refer to the Dell Chassis Management Controller Firmware User’s

Guide on the Dell Support website at http://support.dell.com.

Supported Hardware

Hardware

FN 410S I/O Aggregator: 4x10G SFP+

FN 410T I/O Aggregator: 4x10G Base-T

FN 2210S I/O Aggregator: 4x10G Combo ports

with Ethernet and Fibre

Channel

Note: The Aggregator does not support using the cable Cisco SFP-H10GB-ACU10M revision 37-1150-01.

1 2 3 4 5 6 7 8 ... 14 15

Keine Kommentare

Dell PowerEdge FX2/FX2s Bedienungsanleitung Seite 3