
134 | Using the System Setup Program
Controls the level of ASPM supported on Mezzanine Slot.
L0s entry downstream and L1 enabled.
Controls the level of ASPM supported on the NB-SB. All
entry disabled.
Controls the level of ASPM supported on the NB-SB. L1
entry enabled.
Auto detects the PCI-E maximum payload size.
Sets the PCI-E maximum payload size to 128 Bytes.
Sets the PCI-E maximum payload size to 256 Bytes.
Disables Windows Hardware Error Architecture.
Enables Windows Hardware Error Architecture.
Default, Set PXE boot from on-board NIC then Add-on
NIC adapter.
Set PXE boot from Add-on NIC adapter then on-board
NIC.
Set the PCI signaling rate at Gen3 8.0 Gigabits
bandwidth.
Set the PCI signaling rate at Gen2 5.0 Gigabits
bandwidth.
Set the PCI signaling rate at Gen1 2.5 Gigabits
bandwidth.
NOTE: The PCI-E Gen2 x16 slot 1 and slot 2 are supported up to Gen2 5.0 Gigabits
bandwidth. If user inserts Gen3 .0 devices into the 2 slots that will only train at Gen
2.0 speed, not Gen 3.0.
Kommentare zu diesen Handbüchern