
Installing System Components 97
NOTE: To avoid interference with other components, the maximum allowable
dimensions of the USB key are 24 mm (.94 in) wide x 79 mm (3.11 in) long x 8.6 mm
(.33 in) high.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 80.
3
Locate the USB connector on the control panel board. See Figure 3-11.
4
Insert the USB memory key into the USB connector.
5
Close the system. See "Closing the System" on page 81.
6
Reconnect the system to power and restart the system.
Figure 3-11. Removing and Installing a USB Memory Key
1 USB memory key 2 USB memory key connector
book.book Page 97 Wednesday, December 22, 2010 2:13 PM
Kommentare zu diesen Handbüchern