Dell AX4-5 Bedienungsanleitung Seite 25
- Seite / 56
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Cabling Your Cluster Hardware 25
Cabling Multiple SAN-Attached Clusters to the AX4-5 Storage System
1
In the first cluster, connect cluster node 1 to the SAN.
a
Connect a cable from HBA port 0 to Fibre Channel switch 0 (sw0).
b
Connect a cable from HBA port 1 to Fibre Channel switch 1 (sw1).
2
In the first cluster, repeat step 1 for each node.
3
For each additional cluster, repeat step 1 and step 2.
4
Connect the storage system to the SAN.
a
Connect a cable from Fibre Channel switch 0 (sw0) to SP-A
Fibre
port 0(first fibre port
).
b
Connect a cable from Fibre Channel switch 0 (sw0) to SP-B
Fibre
port 1(second fibre port
).
c
Connect a cable from Fibre Channel switch 1 (sw1) to SP-A
Fibre
port 1(second fibre port
).
d
Connect a cable from Fibre Channel switch 1 (sw1) to SP-B
Fibre
port 0(first fibre port
).
Connecting a PowerEdge Cluster to Multiple Storage Systems
You can increase your cluster storage capacity by attaching multiple storage
systems to your cluster using a redundant switch fabric. PowerEdge cluster
systems can support configurations with multiple storage units attached to
clustered servers. In this scenario, the MSCS software can fail over disk drives
in any cluster-attached shared storage array between the cluster nodes. When
attaching multiple storage systems with your cluster, the following rules apply:
• There is a maximum of four storage systems per cluster.
• The shared storage systems and firmware must be identical. Using
dissimilar storage systems and firmware for your shared storage is not
supported.
- Hardware Installation and 1
- Troubleshooting Guide 1
- Notes, Notices, and Cautions 2
- Contents 3
- 4 Contents 4
- Cluster Solution 6
- Cluster Hardware Requirements 6
- Cluster Nodes 7
- Cluster Storage 8
- Direct-Attached Cluster 9
- SAN-Attached Cluster 10
- Other Documents You May Need 11
- Introduction 12
- Cabling Your Cluster Hardware 13
- Networks 15
- Cabling the Public Network 17
- Cabling the Private Network 17
- Cabling the Storage Systems 18
- 0Fibre 1Fibre 0 Fibre 1 Fibre 20
- Dell 22
- 0Fibre 1Fibre 0Fibre 1Fibre 24
- Obtaining More Information 27
- Preparing Your Systems for 29
- Clustering 29
- Installation Overview 31
- Installing EMC PowerPath 32
- Switched Fabric 33
- Single Initiator Zoning 34
- Snapshot Management 39
- SAN Copy 39
- Navishphere Manager 39
- MirrorView 39
- Troubleshooting 41
- 42 Troubleshooting 42
- 44 Troubleshooting 44
- 46 Troubleshooting 46
- 48 Troubleshooting 48
- Cluster Data Form 49
- 50 Cluster Data Form 50
- Zoning Configuration Form 51
- 52 Zoning Configuration Form 52
- Index 53 53
- Index 55 55
- 56 Index 56
Verwandte Produkte und Handbücher für Computerhardware Dell AX4-5
(14 Seiten)
Computerhardware Dell E-Port Bedienungsanleitung
(22 Seiten)
(22 Seiten)
Computerhardware Dell DX6000G Bedienungsanleitung
(174 Seiten)
(174 Seiten)
Grizzly G1066Z manuels
Manuels d'utilisation et guides de l'utilisateur pour Machines à broyer Grizzly G1066Z.
Nous fournissons des manuels en pdf 1 Grizzly G1066Z à télécharger gratuitement par type de document : Manuel de l'utilisateur
Kommentare zu diesen Handbüchern