Dell Lifecycle Controller 2 Version 1.0.8 Bedienungsanleitung Seite 40

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 126
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 39
cfgSerialTelnetEnable (Read/Write)
Description
Enables/disables telnet console
Default
0=telnet disabled
Legal Values
0=disabled, 1=enabled
cfgSerialCom2RedirEnable (Read/Write)
Description
Enables/disables the console through the COM 2 port
Default
1=COM 2 (console enabled)
Legal Values
0=Disabled, 1=Enabled
cfgSerialTelnet7flsBackspace (Read/Write)
Description
When enabled, the DRAC 4 will interpret 0x7f characters as backspaces from a telnet session. Some telnet clients send 0x7f characters when you press
<Backspace>. Normally, when you press <Backspace>, 0x08 characters are sent.
Default
0
Legal Values
0=Disabled, 1=Enabled
cfgNetTuning
The group contains parameters to tune the DRAC 4 network configuration.
One instance of the group is allowed. All objects in this group require a DRAC 4 reset before they become active. The following subsections describe the
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Seitenansicht 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 125 126

Kommentare zu diesen Handbüchern

Keine Kommentare