Dell R930 Bedienungshandbuch PDF herunterladen (Seite 109)

Processors and heat sinks

NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be

performed only by Dell certified service technicians.

Use the following procedure when:

• Installing an additional processor

• Replacing a processor

Your system supports two types of processor configurations:

• Four-processor configuration

• Two-processor configuration

NOTE: To ensure proper system cooling, you must install a processor and a heat sink blank in any

empty processor socket.

Removing a heat sink

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be

performed only by Dell certified service technicians.

CAUTION: Never remove the heat sink from a processor unless you intend to remove the

processor. The heat sink is necessary to maintain proper thermal conditions.

NOTE: To ensure proper system cooling, you must install a processor blank and heat sink blank in

any empty processor socket.

1. Ensure that you follow the Safety instructions.

2. Follow the procedure listed in Before working inside your system.

3. Keep the Phillips #2 screwdriver ready.

4. Remove the following:

a. Cooling fans

b. Memory risers

c. Memory riser and fan cage

d. Cable management tray

e. Fan tray

WARNING: The heat sink will be hot to touch for some time after the system has been powered

down. Allow the heat sink to cool before removing it.

109

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 176 177

Keine Kommentare

Dell R930 Bedienungshandbuch Seite 109