Dell XPS 200 Bedienungshandbuch Seite 74

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 132
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 73
74 Removing and Installing Parts
Drive Interface Connectors
Most interface connectors are keyed for correct insertion; that is, a notch or a missing pin on one
connector matches a tab or a filled-in hole on the other connector. Serial ATA cables go to the pin-1
end of the connector. The pin-1 end of a connector on a board or a card is usually indicated by a
silk-screened “1” printed directly on the board or card.
NOTICE: When you connect an IDE interface cable, do not place the colored stripe away from pin 1 of
the connector. Reversing the cable prevents the drive from operating and could damage the controller,
the drive, or both.
Power Cable Connector
To connect a drive using the power cable, locate the power input connector on the system board.
Connecting and Disconnecting Drive Cables
When removing an IDE drive data cable
, grasp the colored pull-tab and pull until the connector
detaches.
When connecting and disconnecting a serial ATA data cable
, hold the cable by the black connector at
each end.
Serial ATA Connector
interface cable
interface connector
power cable connector
power input
connector
Seitenansicht 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 131 132

Kommentare zu diesen Handbüchern

Keine Kommentare