Dell Vostro 1440/1450 Owner's ManualRegulatory Model: P22GRegulatory Type: P22G001, P22G003
1. Connect any external devices, such as a port replicator, battery slice, or media base, and replace any cards, such as an ExpressCard.2. Connect any
2Removing The Battery1. Follow the procedures in Before Working On Your Computer.2. Slide the release latches to unlock the battery.3. Slide the batte
12
3Removing The Secure Digital (SD) Card1. Follow the procedures in Before Working On Your Computer.2. Press in on the SD memory card to release it from
Installing The Secure Digital (SD) Card1. Push the memory card into the compartment until it is fully engaged with a click sound.2. Follow the procedu
4Removing The Hinge Cover1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the screws that secure the hinge
Installing The Hinge Cover1. Install the hinge cover and press on it to secure its connection to the computer.2. Flip the computer around and install
5Removing The Keyboard1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Pry up to release the top four snaps securi
6. Remove the keyboard from the computer.Installing The Keyboard1. Connect the keyboard cable to the system board.2. Insert the keyboard at an angle o
6Removing The Optical Drive1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Remove the scre
Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates
Installing The Optical Drive1. Slide the optical drive into the compartment on the left side of the chassis.2. Tighten the screw to secure the optical
7Removing The Memory Module1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Pry the retenti
Installing The Memory Module1. Insert the memory module into the memory socket.2. Press down on the memory module until the retention clips secure the
8Removing The Palm Rest1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Remove the screws t
7. Pry up the palm rest using a plastic scribe to release all the snaps on the bottom, left, and right sides of the palm rest. Once all the snaps have
9Removing The Power Button Board1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Remove the
7. Lift up the power button board and release the power button board cable through the opening.Installing The Power Button Board1. Insert the power bu
10Removing The Hard Drive1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Remove the palm r
Installing The Hard Drive1. Install the hard drive bracket to the hard drive.2. Tighten the screws that secure the hard drive bracket.3. Place the har
11Removing The Wireless Local Area Network (WLAN) Card1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the
ContentsNotes, Cautions, and Warnings...21 Working on Your Computer...
7. Remove the WLAN card from the computer.Installing The Wireless Local Area Network (WLAN) Card1. Slide the WLAN card into its slot.2. Clip on the WL
12Removing The Coin-Cell Battery1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Remove the
Installing The Coin-Cell Battery1. Install the coin-cell battery to the coin-cell battery compartment.2. Connect the coin-cell battery cable to the sy
13Removing The Audio Board1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Remove the palm
8. Pry the latch to release the audio board.9. Remove the audio board from the computer.34
Installing The Audio Board1. Insert the audio board into its compartment and clip on the latch to secure it in place.2. Connect the audio board cable
14Removing The USB Board1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Remove the optical
8. Lift up the USB board and remove it from the computer.Installing The USB Board1. Insert and align the USB board into its compartment on the compute
15Removing The CPU Fan Assembly And The Heatsink1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboa
Installing The Power Button Board...2610 Removing The Hard Drive...
7. Remove the heat sink and the CPU fan assembly from the computer.Installing The CPU Fan Assembly And The Heatsink1. Place and align the heat sink an
16Removing The Processor1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard.4. Remove the palm re
Installing The Processor1. Insert the processor into the processor socket. Ensure the processor is properly seated.2. Tighten the cam-screw in a clock
17Removing The System Board1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the SD memory card.4. Remove th
14. Lift up the system board at an angle and slide it out from the LAN, VGA, HDMI, and USB sockets.Installing The System Board1. Insert the system boa
9. Install the memory module.10. Install the optical drive.11. Install the keyboard.12. Install the SD memory card.13. Install the battery.14. Follow
18Removing The Speakers1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the SD memory card.4. Remove the ke
18. Press the securing latches and lift up the right speaker.19. Remove the speaker assembly and the speaker cable from the computer.48
Installing The Speakers1. Insert and attach the left and right speakers into their respective compartments.2. Align and route the speaker cable to the
Installing The Camera...5822 Removing The Display Pa
50
19Removing The Display Assembly1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the hinge cover.4. Remove t
9. Disconnect the display cable from the system board.10. Remove the screws that secure the left and right hinges.11. Lift up the display assembly fro
Installing The Display Assembly1. Insert the display assembly hinges into their holders.2. Install the screws that secure both the hinges in place.3.
54
20Removing The Display Bezel1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Starting from the bottom, pry the bez
Installing The Display Bezel1. Align the display bezel in line with the top cover.2. Starting from the bottom edge, press downward on the display beze
21Removing The Camera1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the display bezel.4. Disconnect the c
Installing The Camera1. Insert and align the camera module to its compartment.2. Connect the camera cable to the camera module.3. Install the display
22Removing The Display Panel1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the hinge cover.4. Remove the
11. Release the wireless antennae from the right hinge.12. Release the display cable from the left hinge.13. Lift up the display panel and brackets fr
14. Remove the screws on the left and right display brackets and remove the display panel.Installing The Display Panel1. Attach the left and right bra
9. Install the palm rest.10. Install the optical drive.11. Install the keyboard.12. Install the hinge cover.13. Install the battery.14. Follow the pro
23Removing The Display Cable1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the hinge cover.4. Remove the
12. Peel off the entire display cable from the adhesive affixing it to the display panel and remove.Installing The Display Cable1. Attach the display
11. Install the battery.12. Follow the procedures in After Working Inside Your Computer.65
24Entering System Setup1. Turn on (or restart) your computer.2. When the blue DELL logo is displayed, you must watch for the F2 prompt to appear.3. On
> and < Right Arrow > keys to navigate. As a Menu option is highlighted, the Options List lists the options that define the hardware installe
System Setup OptionsMainSystem Information Displays the computer model number.System Date Re-sets the date on the computer's internal calendar.Sy
1Working on Your ComputerBefore Working Inside Your ComputerUse the following safety guidelines to help protect your computer from potential damage an
AdvancedIntel SpeedStep Enable or disable the Intel SpeedStep feature.Default: EnabledVirtualization Enable or disable the Intel Virtualization featur
SecuritySet Service Tag This field displays your system's service tag. If the service tag is not already set, this field can be used to enter it.
25Diagnostic Beep CodesThe computer may emit a series of beeps during start-up if the display cannot show errors or problems. These series of beeps, c
Battery Status LightsIf the computer is connected to an electrical outlet, the battery light operates as follows:• Alternately blinking amber light an
26SpecificationsNOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more i
AudioType 2.1 channel high definition audioController IDT 92HD87B1Stereo conversion 24-bit (analog-to-digital and digital-to-analog)Interface:Internal
CameraCamera Resolution 1.3 MegapixelVideo Resolution 640 x 480 at 30 fps (Maximum)CommunicationsNetwork adapter 10/100/1000 Mbps Ethernet LANWireless
DisplayWidth 344.20 mm (13.55 inches)Diagonal 396.24 mm (15.60 inches)Active area (X/Y) 344.23 mm x 193.54 mmMaximum resolution 1366 x 768 pixels at 2
BatteryCharge time approximately 4 hours (when the computer is turned off)Voltage 11.1 VDCTemperature range:Operating 0 °C to 35 °C (32 °F to 95 °F)No
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables have connectors with locking tabs
AC AdapterTemperature range:Operating 0 °C to 40 °C (32 °F to 104 °F)Non-Operating –40 °C to 70 °C (–40 °F to 158 °F)PhysicalVostro 1440 / Vostro 1450
EnvironmentalAirborne contaminant level G1 as defined by ISA-71.04–198581
27Contacting DellContacting DellNOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, pac
Recommended ToolsThe procedures in this document may require the following tools:• Small flat-blade screwdriver• #0 Phillips screwdriver• #1 Phillips
Kommentare zu diesen Handbüchern