Dell Latitude V710 Wartungshandbuch PDF herunterladen (Seite 52)

Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manual

6 bottom flex cable

connector

10. Remove the tape that secures the display panel connector and the tape that secures the

middle of the display-feed flex cable to the display panel.

11. Pull the top flex cable connector down and away to remove it from the display panel

connector.

Replacing the Display Panel

1. Reconnect the top flex cable connector to the display panel connector.

2. Reconnect the bottom flex cable connector to the inverter connector on the system board.

3. Replace the tape that secures the display panel connector and the tape that secures the

middle of the display-feed flex cable to the display panel.

4. Place the bottom edge of the display panel in the bottom of the top cover and elevate the

top of the panel with your hand.

5. Lay the display panel in the top cover.

6. Reinstall the four M2 x 3-mm screws that secure the display panel to the top cover.

7. Reinstall the M2.5 x 5-mm screw that secures the display-feed flex cable to the display

assembly.

Display Latch

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and

remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching

an unpainted metal surface on the computer.

Removing the Display Latch

1. Remove the keyboard.

2. Remove the

display assembly.

file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (8 of 10) [2/28/2004 8:22:14 AM]

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 95 96

Keine Kommentare

Dell Latitude V710 Wartungshandbuch Seite 52