6. Remove the eight M2.5 x 5-mm screws (four on each side of the display panel) that secure the display panel to the display cover in sequential order.
7. Lift the display panel out of the display cover.
8. Remove the four M2 x 3-mm screws (two on each side of the display panel) that secure the brackets to the display panel.
9. Use the pull tab to disconnect the bottom flex-cable connector from the inverter connector.
10. Press inward on the metal clamps on both sides of the top flex-cable connector and gently pull to disconnect the top flex-cable connector from the
display locking connector.
Replacing the Display Panel
1. Connect the top flex-cable connector to the display connector.
Kommentare zu diesen Handbüchern